![pageSearch](/themes/hestia/images/page-search.webp)
The Best Running Belts You Can Buy
May 01, 202328 best fanny packs, belt bags and crossbody bags
Jul 12, 2023Outdoor Track & Field Championships Set to Begin Thursday in Myrtle Beach
Sep 30, 2023Arkansas State Men and Women Take Over Lead After Second Day of Sun Belt Outdoor Track & Field Championships
Oct 11, 2023Dragon Ball Creator's Sand Land is Getting a Surprise Video Game
Oct 19, 2023Optical trapping of sub
![Jun 04, 2023](/themes/hestia/images/news-details-icon1.webp)
Scientific Reports volume 13, Article number: 8615 (2023) Cite this article
415 Accesses
1 Altmetric
Metrics details
While optical tweezers (OT) are mostly used for confining smaller size particles, the counter-propagating (CP) dual-beam traps have been a versatile method for confining both small and larger size particles including biological specimen. However, CP traps are complex sensitive systems, requiring tedious alignment to achieve perfect symmetry with rather low trapping stiffness values compared to OT. Moreover, due to their relatively weak forces, CP traps are limited in the size of particles they can confine which is about 100 μm. In this paper, a new class of counter-propagating optical tweezers with a broken symmetry is discussed and experimentally demonstrated to trap and manipulate larger than 100 μm particles inside liquid media. Our technique exploits a single Gaussian beam folding back on itself in an asymmetrical fashion forming a CP trap capable of confining small and significantly larger particles (up to 250 μm in diameter) based on optical forces only. Such optical trapping of large-size specimen to the best of our knowledge has not been demonstrated before. The broken symmetry of the trap combined with the retro-reflection of the beam has not only significantly simplified the alignment of the system, but also made it robust to slight misalignments and enhances the trapping stiffness as shown later. Moreover, our proposed trapping method is quite versatile as it allows for trapping and translating of a wide variety of particle sizes and shapes, ranging from one micron up to a few hundred of microns including microorganisms, using very low laser powers and numerical aperture optics. This in turn, permits the integration of a wide range of spectroscopy techniques for imaging and studying the optically trapped specimen. As an example, we will demonstrate how this novel technique enables simultaneous 3D trapping and light-sheet microscopy of C. elegans worms with up to 450 µm length.
Lasers allow for unique light-matter interactions leading to strong optical forces, particle manipulation and trapping1,2,3,4,5,6,7,8. Optical trapping is a versatile tool with many applications which has allowed for a wealth of fundamental studies, revolutionizing numerous fields of science and engineering since its discovery9,10,11,12,13,14,15. The most basic yet powerful implementation of optical traps is the single-beam gradient force trap, known as optical tweezers16,17,18. In this method, the trap is formed when a laser beam is focused tight enough such that optical forces exerted on the particle of interest confine it. These forces are in general classified into two main contributions. One is the gradient forces which pull particles with higher refractive index with respect to the background medium into regions with larger laser intensity. The second is scattering forces which mainly push the particles along the beam propagation direction. The latter forces can counteract particle trapping, leading to an unstable trap, especially for larger particles (above 10 μm). Therefore, finding a practical approach to compensate for the adverse effects of the scattering forces is a crucial step in stable optical trapping. One common solution is the use of high-NA (Numerical Aperture) microscope objectives, to tightly focus the beam so that gradient forces increase to the point of outmatching the scattering forces in the axial direction. Such focusing typically requires microscope objectives with numerical apertures exceeding one (hence immersion type). This results in a short working distance, narrow field of view and extreme local intensities which usually conflict with the needs of practical applications, especially in biology. Another approach which can avoid the aforementioned disadvantages is the use of two moderately focused counter-propagating (CP) identical beams19,20,21,22,23,24,25,26,27,28,29,30. Here each beam balances the forward scattering forces of the other, generating axial stability to form a 3D trap between the foci of the two beams. Such optical trapping inside suspensions has been achieved using high-NA objectives25,26, low-NA objectives19,31, two fibers20,32,33,34, optical mirror traps35,36,37,38,39,40,41, optical phase conjugation42, holographic counter propagating traps23,37,40 and standing waves which are ideal to trap nanoparticles21,22,23,24,35,36,37,38,39. In these CP trapping configurations, since the trapping occurs between the foci which are separated by tens of microns, not only photodamage is alleviated but also confinement of larger particles up to 100 μm (known as macro-traps) has become possible36,37,41.
However, since the trap is formed between the two foci and slightly away from the beam focus (unlike the OT) the gradient forces and hence the stiffness values of most of these CP beam trapping methods are quite small31,36,40. Consequently, this could lead to some lateral movement and slow rotation of the object, especially in the case of macro-traps41. Moreover, their trapping stiffness is highly sensitive to perfect alignment, which is due to the symmetry requirements of the CP beam traps. As a result, not only the alignment of the dual CP beam methods could be challenging, but also accurate particle positioning and force measurements will be limited to the CP trapping configurations. This problem is exacerbated if the foci distance is increased to extend the particle manipulation range. This is due to the fact that for CP traps, the optical forces and hence trap stability is strongly dependent on the foci separation31,36,43. The questions that arise here are the following: can we modify the dual CP beam configuration to simplify the alignment complexity and consequently reduce trapping stiffness sensitivity to perfect symmetry? And is there a way to increase the trapping size limit in order to stably confine particles larger than 100 μm?
In a previous study, we addressed the first question by utilizing dual Asymmetrical Counter-Propagating (ACP) beams along with the use of low-NA components to form the optical trap44,45. We showed that the asymmetry introduced in the two CP beam system not only increases trapping stiffness (with respect to traditional CP beam traps) but also allows for the axial scattering forces to be balanced over a wide spatial length. This in turn granted stable trapping and particle manipulation over a millimeter-range where the trapping stiffness remained almost independent of foci separation.
In this paper we plan to address the second question regarding trapping larger particles, but to do so first we will discuss a significantly less complex setup to create ACP traps than presented before44. We will demonstrate why this system is substantially easier to align and shows much less sensitivity to misalignments. Next, the trapping properties of the proposed system are studied, showing its capability for easy long-range particle manipulation inside liquid media. Our findings indicate enhanced trap stiffness values compared to conventional symmetric dual CP traps, when similar experimental conditions are used. Later, we observe the applications of the proposed ACP beams system in trapping significantly larger objects, especially elongated biological samples such as C. elegans worms with different lengths (up to 450 µm), using optical forces only. Finally, we demonstrate how spectroscopic imaging techniques such as light-sheet fluorescence microscopy can be easily integrated in this stable trapping system to generate more detailed images, without specimen movement.
In the ACP dual beam trapping system44, unlike the traditional symmetric CP beams setup, we utilize two different optics with very different focal lengths to create the trap. To this end, a lens with a long focal length of 15 cm (hence long Rayleigh range) is placed on one side of the sample, while a low-NA objective (0.25 to 0.4 depending on particle size) is placed on the other side. So, while one side creates a relatively tight focus (OT like) the other side generates an almost collimated beam within the sample chamber, propagating in the opposite direction. In such a system, while the objective allows for 2D confinement (laterally), the two ACP beams work together to balance scattering forces (axially), creating a stable 3D trap. Since one of the two beams acts collimated within the sample, as its counter propagating beams’ tighter focus translates, the trap shifts without noticeable stability change for hundreds of microns, as shown later. Note that due to the low-NA objective used, thermal effects are avoided.
In this work, to generate the ACP trap, we use a more simplified system compared to our previous work44 that uses only one incoming laser beam, as observed in Fig. 1a, described in the following. A laser beam, entering the system from the left is focused by a lens (fl = 15 cm), forming the first focus with a long Rayleigh range (zr ≈ 650 µm). This beam is then collected by a low-NA microscope objective and directed to the end mirror (M) and folds back on itself, while passing twice through a variable neutral density filter wheel (VND) on its way, allowing power adjustments. The retro-reflected beam goes straight into the back aperture of the same microscope objective and comes to a tighter focus (the second focus) somewhere within zr of the first focus, while propagating in the opposite direction forming the ACP beam trap. Each beam alone is unable to trap a particle, rather pushes it away. Only through the synergy of the two beams, we can generate a tight 3D trap which can occur at any point within and beyond zr, controlled by the objective location. Figure 1b shows the potential landscape generated by the ACP beams. To obtain Fig. 1b we computed the radiation pressure due to all incident beams as \({\mathrm{S}}_{\mathrm{z}}/\mathrm{c}\), where \({\mathrm{S}}_{\mathrm{z}}\) is the total Poynting vector in the axial direction and \(\mathrm{c}\) is the speed of light. To obtain the potential landscape of Fig. 1b, we performed a path integral of the radiation pressure in the \(\mathrm{z}\) direction from an arbitrary reference point to the location of interest. The result is a potential whose gradient yields the radiation pressure at each point on the optical axis. Figure 1c demonstrates the setup used in our lab to create the ACP trap which includes both front- and side-view imaging. Here, in order to have front-view imaging, we replace the mirror in Fig. 1a with a notch filter (NF) which acts like a mirror for the laser beam forming the trap, while transmitting all other wavelengths. The objective (MO1) is responsible for both front-view imaging and generating the tighter focus for optical trapping. For this reason, it sits on a motorized stage, so the exact location of its focus is in our control. Also, a quarter-waveplate (\(\lambda /4\)) is placed in the system such that it changes the polarization of the retro-reflected beam, preventing the formation of standing waves. Compared to the conventional dual CP traps, our setup is significantly less complex, easier to align and more robust to slight misalignments with an overall larger axial trapping stiffness as shown later. These are mainly due to the use of a single retro-reflected beam, low-NA optics and the broken symmetry of the beams forming the trap, about its centre.
Retro-reflecting ACP trap setup with one incoming beam: (a) the basic idea of ACP trap formation: the only incoming beam entering the setup from the left, passes through the lens to create a loose focus with a long Rayleigh range which is collimated by a low-NA microscope objective and folds back on itself by the end mirror (M). VND is Variable Neutral Density filter wheel. (b) Is a simulation of the ACP system, demonstrating the formation of a potential well for the asymmetric trap, when the objective focus is 500 µm away from lens focus. (c) The retro-reflecting ACP setup used in our experiments: 830 nm Laser (MSquared Equinox SolsTiS PI), L1 and L2: two lenses with f1,2 = 15 cm, L1 in combination with MO1 (Olympus 20×/0.40 or Olympus 10×/0.25 depending on particle size) creates a 3D trap based on a single retro-reflecting ACP beam. If needed MO1 allows for frontal view and tracking, where L2 is used for frontal imaging. MO2: 4× (Olympus 4×/0.1) to 20× (Olympus 20×/0.40) objective used for side-view. MO1 is mounted on a motorized stage (MS) which moves axially. BE beam expander, WL white light, NF 830 nm Notch Filter which reflects 830 nm beam, DM dichroic mirror, S: sample and a quarter wave plate (\(\lambda /4\)) to change the beams polarization by 90° after passing through it twice. The two cameras are CMOS cameras.
There are many studies using a retro-reflected CP beam to trap and manipulate either nanoparticles21,24,35,36,37,38,39 by generation of standing waves or micro-particles36,40,41,43 between two tight foci tens of microns apart. However, they demonstrate relatively low values for the trap stiffness that is highly dependent on foci separation31,36,43. This in turn limits the manipulation range to tens of microns at most and the low stiffness values results in particle movement and rotation which can reduce image quality in certain microscopy techniques which require longer scanning times. As we will see shortly, the proposed ACP trapping system here, not only increases the trap stiffness, but also keeps its value almost independent of the foci distance, consequently allowing for the trapping, delivery or imaging of larger particles and microorganisms without any movement.
For the conventional CP trapping systems in general, due to lower NA optics utilized (with respect to OT) the gradient forces are smaller, especially since the trap is formed in-between the foci due to perfect symmetry. These forces are even weaker if the foci separation is increased to tens of microns to increase manipulation range31,36,43. In this case, axial trapping is merely due to the balancing of the scattering forces. However, in the case of ACP traps, due to the broken symmetry of the beams, the stiffness values can be significantly improved by judiciously tuning the power ratios such that the trap is formed not somewhere between the foci, but rather at the location of the tighter focus. In this case while axial scattering forces are still balanced, the lateral gradient forces felt by the particle are much stronger because of its vicinity to the tighter focus. This is due to one beam being almost collimated (for hundreds of microns) while the other is focused much tighter, diverging quickly, thereby reducing its radiation pressure away from its focus. Consequently, by adjusting the power ratios we can create the axial balance at the location of the tighter focus, and as this focus is translated (by moving the objective) so is the trap's position, as schematically illustrated in Fig. 2a. Here, the axial location of the potential well (trap position) generated by ACP beam is completely dominated by the position of the tighter focus as shown in Fig. 1b. In this figure, the lens focus is at position zero while the objective focus is 500 µm away and as illustrated in the plot the generated potential well location coincides with the objective's focus.
Particle translation behaviour: (a) A schematic demonstration of the trap position translation by moving objective MO1. (b,c) Experimental results of a trapped 5 µm particle (polystyrene bead) translation in water along the ACP beams as MO1 is translated by 100/1.33 μm steps in free space (which refers to 100 μm in water). (b) Axial and lateral trap stiffnesses measurements as a function of trap position inside the suspension for the confined 5 μm particle. (c) Experimental relationship found between axial objective translation in air and axial particle position inside the suspension.
Utilizing the setup shown in Fig. 1c where L1 has fl = 15 cm and MO1 is a 20× objective with NA = 0.4, we generated the ACP trap to confine a 5 µm polystyrene bead inside a 1 mm wide quartz cuvette filled with water. The laser powers used are 50 mW and 25 mW out of lens (L1) and objective (MO1), respectively. Lower powers can be used but that reduces the trap stiffness. Once a particle fell into the trap (which coincided with the location of MO1's focus) it could be translated forward and back along the ACP beams by moving MO1. Experimental measurements of a trapped particle's displacement behavior due to the objective's axial translation, and the trap's stiffness value at different locations in a 1 mm length are demonstrated in Fig. 2b,c. In plot (b), the lens focus was fixed at the location of the left-side wall of the cuvette and the objective was moved with respect to this wall in 100 µm/nwater increments outside of the sample chamber and towards the right, where nwater = 1.33. The increment value corresponds to a 100 µm displacement of MO1's focus inside water. As shown in Fig. 2c the trapped particle follows MO1's displacement with an almost one-to-one ratio up to position 500 µm inside the sample. After that it starts deviating and the particle translates slightly less, and the line starts bending. This deviation happens because as the particle is moved further away from the focus of the lens, the scattering forces (axial radiation pressure) imposed on it by the moderately focused beam (by lens L1), starts to drop more noticeably. Consequently, this will lead to the trap forming slightly away from the tighter focus which is where the axial forces balance.
We also characterized the ACP trap stability as a function of the particle location inside the sample chamber, by measuring the axial and lateral stiffnesses (κz, κx). Figure 2b illustrates the results of trap stiffness measurements after every 100 µm of particle axial translation inside the suspension, for up to 1 mm length. In these measurements, the PSD (power spectrum density) method was used, and at each location the measurements are repeated 10 times for both axial and lateral directions and averaged in order to find κz and κx, respectively. The PSD is found by tracking the particle for 10 s, using a side-view CMOS camera with 1000 fps. The first and last data points are measured 25 µm away from the wall to avoid surface effects. As observed in Fig. 2b both axial and lateral stiffness values remain almost constant as we move the trap position up to ~ 500 µm. In this range the average measured stiffness values are κx = 7.7 pN/µm and κz = 3.8 pN/µm which are about one order of magnitude larger than the conventional CP trap stiffnesses reported previously6,36,40,41 where similar experimental parameters have been used. The reason for this boost in stiffness values we demonstrate here is due to the asymmetry of our system which causes the trap to form very close to the objective's focus, resulting in enhanced gradient forces felt by the particle which is independent of foci separation of up to ~ 500 µm. For the conventional CP traps, due to perfect symmetry, the trap is formed in the middle of the foci and depending on their distance, the gradient forces on the particle and consequently stiffness values could be significantly smaller. As we translated the particle further out of the lens's Rayleigh range, it remained confined, but the measured trap stiffnesses dropped. This result is in agreement with the line bending observed in plot 2c and is due to the trap location deviating away from the objective's focus as the particle is translated further away from the lens's Rayleigh range. This deviation reduces the gradient trapping forces felt by the particle, leading to a decrease in stiffness values.
Using the exact same setup, we were able to trap and translate polystyrene particles with diameters between 1 and 100 µm, inside aqueous suspension. This capability of the system along with the results presented in Fig. 2 demonstrates the flexibility of the ACP system in particle trapping and manipulation. The ability to translate and control the trap's axial location with micron precision for several hundreds of microns is quite unique. These properties are very different from the conventional CP traps where one can only move a trapped particle for tens of microns before it escapes the trap. Also, in the case of symmetric CP traps, if the focus of one objective moves by distance d inside the sample, the trapped particle moves by d/2. All these differences arise from the asymmetry introduced here.
In order to further investigate the properties of the retro-reflected ACP traps and how they differ from the conventional CP traps, we theoretically modelled both systems’ axial forces using parameters similar to those used in our experiments. The results of this study are briefly discussed here and can be found in more details in Supplementary Fig. S1. Our calculations show that for the ACP trap, even at large foci separations (of more than 500 µm), the particle can still be confined due to the existing strong optical forces. This result is in agreement with our experimental results presented in Fig. 2 and explains why we are able to easily translate a trapped particle for hundreds of microns. On the other hand, our theoretical findings for the symmetric CP trap are in contrast with those of ACP trap (with comparable lateral stiffness values). For the symmetric CP trap, if the foci separation becomes larger than tens of microns, their axial forces become too small, and a stable 3D trap becomes impossible. This result is in agreement with previous reports regarding conventional CP traps where their trapping stiffness is a strong function of foci separation36,43 and drops rapidly as foci separation increases. This in turn limits the manipulation area to tens of microns for CP traps. In another theoretical study, we investigated both ACP and CP trap translation capability by only changing the power ratios of the two sides. Our results shown in Supplementary Fig. S1a indicate that changing the power ratios in either case will move the trap location by tens of microns only. Overall, our findings from the axial force study suggest how the asymmetry introduced to the conventional CP trapping system can significantly extend the optical force range, and consequently increase our control over the exact trapping location within a millimetre path.
So far, we have only demonstrated the confinement of small particles using the retro-reflected ACP trap proposed. However, as we will soon observe, this technique is very suitable for trapping significantly larger macro-sized particles which can be spherical or non-spherical. In this section, we will start with 3D trapping of large polystyrene beads then we will demonstrate confinement of living biological samples. First using the setup in Fig. 1c (where MO1,2 are 10× objectives with NA of 0.25) we were able to trap 150 µm polystyrene beads inside an aqueous suspension as illustrated in Fig. 3a. The video of this confinement is in Supplementary Visualization 1. We added 10 µm polystyrene beads to the suspension, for comparison purposes as seen in Fig. 3a. We were also able to translate the 150 µm particle by slowly moving MO1. Sequence of images showing the translation of this bead is presented in Supplementary Visualization 2. The laser power used for trapping such large polymer bead was 100 mW in total: 67 mW from the beam exiting lens L1 and 33 mW from the retro-reflected beam exiting MO1 and entering the sample. It is important to note that in a previous research48 a 100 µm polymer sphere was trapped between two fibers with a trapping power of 800 mW from each fiber arm. Compared to that study, the power levels used in our study are significantly smaller and the particle trapped here is 1.5 times larger. The rather small power required for trapping, along with the capability of confining much larger objects indicates that the ACP beam trap is an ideal tool for trapping biological specimen.
Trapping of much larger micron-size objects using the retro-reflected ACP trapping system. Confinement of: (a) 150 µm polystyrene bead, (b) 115 µm Volvox and (c) 250 µm Micrasterias Waris living microorganisms.
Next, using the same setup and parameters, we were able to readily trap 115 µm Volvox (Fig. 3b) and 250 µm Micrasterias Waris (Fig. 3c) living microorganisms inside water. The video of trapped Micrasterias Waris is available in Supplementary Visualization 3.
Many biological samples are either elongated or rod shaped, such as chromosomes, intracellular organelles, a wide variety of bacteria and parasites, membrane tubules, certain microalgae and micro-worms. Optical trapping such samples usually requires complex systems involving beam shaping. Consequently, 3D optical trapping of rod-shaped particles in a specific orientation can be challenging or not possible. Here, by integrating a second laser beam into the retro-reflecting ACP trapping system, as shown in Fig. 4, we can easily trap elongated or rod-shaped objects as described in the following. The second beam, which is chosen at a slightly different wavelength (λ = 785 nm with ~ 30 mW) is combined with the retro-reflected 830 nm beam using a DM (dichroic mirror), both entering MO1 while copropagating. The two beams pass through the sample (B2 and B3 in Fig. 4a) focusing at two separate locations, where their distance can be simply controlled by moving lens L3 (fl = 15 cm which changes the divergence of the 785 nm laser beam). The combination of the three beams (B1, B2 and B3 with ~ 80 mW, ~ 30 mW and ~ 30 mW, respectively) forms a 3D trap for elongated objects. Using this system, we successfully trapped Paramecium aurelia (Fig. 4c) and Caenorhabditis elegans (C. elegans) micro-organisms (Fig. 4d,e). The C. elegans worms confined were in different larval stages with various sizes ranging between 250 and 450 µm in length. The media of a larva (stage L2) confined in our dual ACP trap, can be found in the Supplementary Visualization 4.
(a) The schematic of the proposed dual trap ACP beams to confine elongated objects using a combination of three beams. B1 is the 830 nm beam focused via L1 (fl = 15 cm) with a long Rayleigh range, B2 is the retro-reflected beam that is focused tightly via MO1 (Olympus 10×/0.25). B3 is a 785 nm laser beam also focused by MO1 slightly after the focus of B2. (b) Modified folding ACP beam setup to achieve 3D confinement for elongated objects. Here MO1 is 10× with NA 0.25, MO2 varied between 4×, 10× and 20× objective depending on object size and the application. (c–e) are the bright field images of optically trapped microorganisms: (c) 130 µm Paramecium aurelia, (d) 260 µm, (e) 385 µm C. elegans larvae.
Next, we added light-sheet fluorescence microscopy to the ACP trapping system illustrated in Fig. 4b for simultaneous 3D trapping and imaging of the trapped C. elegans larvae. For this microscopy, the lipid droplets in the larva were stained with the fluorescent dye Nile red (a lipophilic stain that fluoresces in a lipid environment). As demonstrated in Fig. 5a, we use a 532 nm laser to excite the confined stained C. elegans worm. The beam is focused by a cylindrical lens (CL with fl = 7.5 cm) onto a steering mirror (SM) and then relayed to the back aperture of MO3 objective (10× with NA of 0.3) by a relay lens combination (two identical lenses L2 and L3 with fl = 5 cm). The fluorescence is collected perpendicular to the illumination plane with a 20× water immersion microscope objective (MO2) with NA of 0.6 and imaged on the top-view CMOS camera. The bright field image of a 450 µm stained C. elegans larva is shown in Fig. 5b. An example of a sectional light-sheet image taken parallel to the plane the larva lies on, is presented in Fig. 5c.
(a) The zoomed in optical setup showing only the objectives and lenses that are involved in optical trapping (L1 and MO1) and light-sheet fluorescence microscopy (MO2, MO3 and L2 to L4). Here: CL cylindrical lens with fl = 7.5 cm, MO3 is a 10× objective with NA of 0.3 (Olympus UPlanFL N 10×/0.30) while MO2 is 20× water immersion objective with NA of 0.6 (Thorlabs TL20X-MPL 20×/0.60 W/400–900 nm \(\infty\)/WD 5.5 mm). L2 and L3 are relay lens system both with fl = 5 cm. L4 with fl = 10 cm is used for imaging. (b) Is the bright field microscopy of a 450 µm stained C. elegans larva and (c) is the light-sheet fluorescence microscopy image of the same larva shown in (b).
It should be noted here that for smaller trapped objects (≤ 100 µm), we did not need to add MO3 for light-sheet microscopy, since MO1 could be used for both trapping and light-sheet formation. This could be easily achieved by utilizing a dichroic mirror to combine the excitation laser (here 532 nm) with the retro-reflected beam, before entering MO1. Here we have only demonstrated one possible imaging technique (light-sheet microscopy) which was easily integrated in our optical trapping setup. However, since our system, unlike most previous studies, allows objects of interest to be confined inside a much larger chamber and without a tight physical constraint (such as using a coverslip or agarose), it enables the integration of a variety of imaging techniques (with a large field of view) to better study bio-samples and their development. Consequently, our system has the potential for 4D imaging (3D imaging over time) in order to study specific dynamics in bio-matter.
In summary, we have demonstrated how breaking the symmetry of the well-known counter-propagating optical trapping system can modify the overall optical forces leading to increased trapping stability and allowing for long-range particle trapping and manipulation in liquid media. While there are numerous reports on long-range particle manipulation via optical tweezers, most of them are performed in gas or vacuum media and mainly rely on thermophoretic forces29,46,47. Here we trap and manipulate a broad range of particles with different sizes and shapes, including microorganisms, with the use of radiation pressure forces and without creating standing waves22 or thermal effects. Due to the asymmetry around the trap created by the lens-objective combination, the sensitivity of the trap stiffness on foci separation is extremely reduced which in turn, allows for trapping at extended foci separation which is not possible with conventional CP traps. Moreover, the broken symmetry combined with the retro-reflection of the beam and the use of only one low-NA objective, have not only significantly simplified the alignment but also made it very robust and cost efficient. The proposed ACP setup has increased axial trapping stiffnesses by at least an order of magnitude with respect to the symmetric CP beams that have similar experimental parameters. While our setup shares the simplicity and flexibility of a single-beam optical tweezer, it allows for the use of objectives with very small NAs for particle trapping. This results in a larger working distance and field of view while avoiding the undesired thermal effects. This is of particular interest when far-field, non-invasive trapping and manipulation is desired inside liquid media. All these advantages make this system very practical for long-range optical trapping for a variety of samples and allow for the possibility of integration of spectroscopy-based microscopy techniques, as demonstrated here. It is worth mentioning that in the past few years, techniques such as optical mirror traps36,37 (or optical macro-tweezers41) all use a mirror behind the sample to form counter propagating trapping beams but there are major differences. While most of these studies use a spatial light modulator (SLM), making their setup quite complex and expensive, the retro-reflecting mirror used is placed within the sample chamber making both sample preparation and side-view imaging quite challenging. In our proposed method the mirror (which is a NF) is placed far from the sample allowing for side-view access without the need for special sample preparation or complicated imaging techniques. Additionally, the unique asymmetry of our trapping beams creates stable millimetre-range 3D trapping and manipulation capabilities with enhanced stiffness values absent in the aforementioned studies due to their beam symmetry.
Data are not publicly available but can be obtained from Shima Fardad upon reasonable request.
Ashkin, A. History of optical trapping and manipulation of small-neutral particle, atoms, and molecules. IEEE J. Sel Top Quant. 6, 841–856 (2000).
Article CAS Google Scholar
Han, F. & Yan, Z. J. Phase transition and self-stabilization of light-mediated metal nanoparticle assemblies. ACS Nano 14, 6616–6625 (2020).
Article CAS PubMed Google Scholar
Xin, H. B. et al. Optical forces: From fundamental to biological applications. Adv. Mater. 32, 2001994 (2020).
Article CAS Google Scholar
Fardad, S. et al. Scattering detection of a solenoidal Poynting vector field. Opt. Lett. 41, 3615–3618 (2016).
Article ADS PubMed Google Scholar
Corsetti, S. & Dholakia, K. Optical manipulation: Advances for biophotonics in the 21st century. J. Biomed. Opt. 26, 070602 (2021).
Article ADS CAS PubMed PubMed Central Google Scholar
Gieseler, J. et al. Optical tweezers—From calibration to applications: A tutorial. Adv. Opt. Photon. 13, 74–241 (2021).
Article Google Scholar
Fardad, S. et al. Plasmonic resonant solitons in metallic nanosuspensions. Nano Lett. 14, 2498–2504 (2014).
Article ADS CAS PubMed Google Scholar
Gao, D. L. et al. Optical manipulation from the microscale to the nanoscale: Fundamentals, advances and prospects. Light-Sci. Appl. 6, e17039 (2017).
Article CAS PubMed PubMed Central Google Scholar
Svoboda, K., Schmidt, C. F., Schnapp, B. J. & Block, S. M. Direct observation of kinesin stepping by optical trapping interferometry. Nature 365, 721–727 (1993).
Article ADS CAS PubMed Google Scholar
Grier, D. G. A revolution in optical manipulation. Nature 424, 810–816 (2003).
Article ADS CAS PubMed Google Scholar
Bustamante, C. J., Chemla, Y. R., Liu, S. X. & Wang, M. D. Optical tweezers in single-molecule biophysics. Nat. Rev. Method Prime 1, 6 (2021).
Google Scholar
Bradac, C. Nanoscale optical trapping: A review. Adv. Opt. Mater. 6, 1800005 (2018).
Article Google Scholar
Dholakia, K. & Reece, P. Optical micromanipulation takes hold. Nano Today 1, 18–27 (2006).
Article Google Scholar
Zaltron, A., Merano, M., Mistura, G., Sada, C. & Seno, F. Optical tweezers in single-molecule experiments. Eur. Phys. J. Plus 135, 6 (2020).
Article Google Scholar
Yan, Z. J., Sajjan, M. & Scherer, N. F. Fabrication of a material assembly of silver nanoparticles using the phase gradients of optical tweezers. Phys. Rev. Lett. 114, 143901 (2015).
Article ADS PubMed Google Scholar
Ashkin, A., Dziedzic, J. M., Bjorkholm, J. E. & Chu, S. Observation of a single-beam gradient force optical trap for dielectric particles. Opt. Lett. 11, 288–290 (1986).
Article ADS CAS PubMed Google Scholar
Molloy, J. E. & Padgett, M. J. Lights, action: Optical tweezers. Contemp. Phys. 43, 241–258 (2002).
Article ADS CAS Google Scholar
Butler, C. et al. Imaging, Manipulation, and Analysis of Biomolecules, Cells, and Tissues X 36–41 (SPIE, 2012).
Google Scholar
Ashkin, A. Acceleration and trapping of particles by radiation pressure. Phys. Rev. Lett. 24, 156 (1970).
Article ADS CAS Google Scholar
Constable, A., Kim, J., Mervis, J., Zarinetchi, F. & Prentiss, M. Demonstration of a fiber-optical light-force trap. Opt. Lett. 18, 1867–1869 (1993).
Article ADS CAS PubMed Google Scholar
Zemanek, P., Jonas, A., Sramek, L. & Liska, M. Optical trapping of nanoparticles and microparticles by a Gaussian standing wave. Opt. Lett. 24, 1448–1450 (1999).
Article ADS CAS PubMed Google Scholar
Cizmar, T., Garces-Chavez, V., Dholakia, K. & Zemanek, P. Optical conveyor belt for delivery of submicron objects. Appl. Phys. Lett. 86, 174101 (2005).
Article ADS Google Scholar
Cizmar, T., Brzobohaty, O., Dholakia, K. & Zemanek, P. The holographic optical micro-manipulation system based on counter-propagating beams. Laser Phys. Lett. 8, 50–56 (2011).
Article ADS Google Scholar
Karpinski, P., Jones, S., Andren, D. & Kall, M. Counter-propagating optical trapping of resonant nanoparticles using a uniaxial crystal. Laser Photon. Rev. 12, 1800139 (2018).
Article ADS Google Scholar
van der Horst, A., Oostrum, P. D. J., Moroz, A., van Blaaderen, A. & Dogterom, M. High trapping forces for high-refractive index particles trapped in dynamic arrays of counterpropagating optical tweezers. Appl. Opt. 47, 3196–3202 (2008).
Article ADS PubMed Google Scholar
Zhao, C. L. Practical guide to the realization of a convertible optical trapping system. Opt. Express 25, 2496–2510 (2017).
Article ADS PubMed Google Scholar
Donato, M. G. et al. Optical trapping, optical binding, and rotational dynamics of silicon nanowires in counter-propagating beams. Nano Lett. 19, 342–352 (2019).
Article ADS CAS PubMed Google Scholar
Yang, Y. J., Ren, Y. X., Chen, M. Z., Arita, Y. & Rosales-Guzman, C. Optical trapping with structured light: A review. Adv. Photon. 3, 34001 (2021).
Article CAS Google Scholar
Gong, Z. Y., Pan, Y. L., Videen, G. & Wang, C. J. Optical trapping and manipulation of single particles in air: Principles, technical details, and applications. J. Quant. Spectrosc. Radiat. Transf. 214, 94–119 (2018).
Article ADS CAS Google Scholar
Tauro, S., Banas, A., Palima, D. & Gluckstad, J. Dynamic axial stabilization of counter-propagating beam-traps with feedback control. Opt. Express 18, 18217–18222 (2010).
Article ADS PubMed Google Scholar
Lindballe, T. B. et al. Three-dimensional imaging and force characterization of multiple trapped particles in low NA counter propagating optical traps. J. Eur. Opt. Soc. Rapid 6, 11057 (2011).
Article Google Scholar
De Coster, D. et al. Mass-manufacturable polymer microfluidic device for dual fiber optical trapping. Opt. Express 23, 30991–31009 (2015).
Article ADS PubMed Google Scholar
Bellini, N. et al. Validation and perspectives of a femtosecond laser fabricated monolithic optical stretcher. Biomed. Opt. Express 3, 2658–2668 (2012).
Article ADS PubMed PubMed Central Google Scholar
Guck, J. et al. The optical stretcher—A novel laser tool to micromanipulate cells. Biophys. J. 80, 277 (2001).
Google Scholar
Jakl, P., Sery, M., Jezek, J., Liska, M. & Zemanek, P. Axial optical trap stiffness influenced by retro-reflected beam. J. Opt. A Pure Appl. Opt. 9, S251–S255 (2007).
Article ADS Google Scholar
Pitzek, M., Steiger, R., Thalhammer, G., Bernet, S. & Ritsch-Marte, M. Optical mirror trap with a large field of view. Opt. Express 17, 19414–19423 (2009).
Article ADS CAS PubMed Google Scholar
Zwick, S. et al. Holographic twin traps. J. Opt. A Pure Appl. Opt. 11, 034011 (2009).
Article ADS Google Scholar
Yan, Z. J. et al. Three-dimensional optical trapping and manipulation of single silver nanowires. Nano Lett. 12, 5155–5161 (2012).
Article ADS CAS PubMed Google Scholar
Wu, M. Y., Ling, D. X., Ling, L., Li, W. & Li, Y. Q. Stable optical trapping and sensitive characterization of nanostructures using standing-wave Raman tweezers. Sci. Rep. 7, 42930 (2017).
Article ADS CAS PubMed PubMed Central Google Scholar
Bowman, R. et al. Position clamping in a holographic counterpropagating optical trap. Opt. Express 19, 9908–9914 (2011).
Article ADS CAS PubMed Google Scholar
Yang, Z. Y., Piksarv, P., Ferrier, D. E. K., Gunn-Moore, F. J. & Dholakia, K. Macro-optical trapping for sample confinement in light sheet microscopy. Biomed. Opt. Express 6, 2778–2785 (2015).
Article PubMed PubMed Central Google Scholar
Woerdemann, M., Berghoff, K. & Denz, C. Dynamic multiple-beam counter-propagating optical traps using optical phase-conjugation. Opt. Express 18, 22348–22357 (2010).
Article ADS CAS PubMed Google Scholar
Rodrigo, P. J., Perch-Nielsen, I. R. & Gluckstad, J. Three-dimensional forces in GPC-based counterpropagating-beam traps. Opt. Express 14, 5812–5822 (2006).
Article ADS PubMed Google Scholar
Lialys, L., Lialys, J. & Fardad, S. Optical tunnels: Long-range optical trapping and manipulation in aqueous media. Osa Continuum 4, 2535–2542 (2021).
Article CAS Google Scholar
Lialys, J., Lialys, L., Salandrino, A. & Fardad, S. Conference on Lasers and Electro-Optics. FF1A.6 (Optica Publishing Group, 2022).
Mitra, T., Brown, A. K., Bernot, D. M., Defrances, S. & Talghader, J. J. Laser acceleration of absorbing particles. Opt. Express 26, 6639–6652 (2018).
Article ADS CAS PubMed Google Scholar
Lin, L. H. et al. Opto-thermoelectric pulling of light-absorbing particles. Light-Sci. Appl. 9, 6 (2020).
Article Google Scholar
Jess, P. R. T. et al. Dual beam fibre trap for Raman microspectroscopy of single cells. Opt. Express 14, 5779–5791 (2006).
Article ADS CAS PubMed Google Scholar
Download references
Department of Electrical Engineering & Computer Science, University of Kansas, Lawrence, 66045, USA
Laurynas Lialys, Justinas Lialys, Alessandro Salandrino & Shima Fardad
I2S, Institute for Information Sciences, University of Kansas, Lawrence, 66045, USA
Alessandro Salandrino & Shima Fardad
Department of Molecular Biosciences, University of Kansas, Lawrence, 66045, USA
Brian D. Ackley
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
L.L. and J.L. designed and setup the system, conducted the experiments, and collected the data. S.F., A.S., and B.A. wrote the manuscript. All authors reviewed the manuscript.
Correspondence to Shima Fardad.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information 2.
Supplementary Information 4.
Supplementary Information 5.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Lialys, L., Lialys, J., Salandrino, A. et al. Optical trapping of sub-millimeter sized particles and microorganisms. Sci Rep 13, 8615 (2023). https://doi.org/10.1038/s41598-023-35829-7
Download citation
Received: 02 March 2023
Accepted: 24 May 2023
Published: 27 May 2023
DOI: https://doi.org/10.1038/s41598-023-35829-7
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.